How to Find Your Furnace and Change Your Furnace Filter

Many homeowners don’t know a lot about their HVAC system, including where key equipment like the furnace is located. If you don’t know where the furnace is, you can’t handle routine furnace maintenance tasks like inspecting the furnace air filter. This and other simple chores can improve your furnace’s energy efficiency. It’ll also help reduce the risk of damage or a malfunction.

Where Is the Furnace?

Most furnaces are located in the center of your home, either in a special utility closet or downstairs in the basement. If your home doesn’t have a basement, it can also be in a crawl space or the attic. You may find other equipment like the water heater or your washing machine nearby.

Once you’ve found where your furnace is, the next step is to locate the furnace filter.

Where Is My Furnace Filter Located?

You’ll most often find the air filter inside the blower compartment, which is accessible through a metal door or hatch on the lower half of the furnace. It may also be in a sliding compartment next to the air handler component of your furnace or on a rack installed on the furnace’s side. It will be located in a place where it can collect dust, pollen and other airborne particles as they make their way through your HVAC system.

Over time, the furnace filter accumulates more and more particles. At a certain point it will reduce airflow and might reduce your home’s indoor air quality as well as your HVAC system’s overall efficiency. By periodically cleaning or replacing the filter, you’ll keep everything working more effectively.

How Do I Change the Air Filter in My Furnace?

Thankfully, you don’t need years of HVAC experience to know how to change a furnace filter. In fact, it’s one of the easiest tasks you can do to help encourage the best performance from your HVAC system. Here are some things to keep in mind before you begin:

    • Make sure you check the filter’s size so the replacement air filter matches.
    • Switch the furnace’s power off before you access the air filter.
    • Slowly pull the filter out so the housing isn’t damaged or knocked out of place.
    • Finally, look on the new filter for an arrow illiustrating how the filter should be oriented before installing it into your furnace.

Should I Change My Furnace Filter Every Month?

Ultimately, knowing how often to change your furnace filter depends on several things. Start with the model of the filter itself, as more efficient filters generally last longer. You’ll also want to review your indoor air quality needs, the size of your family and number of pets as well as local pollution levels.

Standard filters suggest replacement every 1-2 months, or as short as 20-45 days each if you have several pets and someone in the house has allergies.

Does It Matter What Furnace Filter You Use?

The quality of your furnace filter might have a large impact on your HVAC system’s overall efficiency as well as your home’s indoor air quality. The ideal way to check the quality of your furnace filter is its MERV rating. This stands for the Minimum Efficiency Reporting Value, and indicates the filter’s effectiveness at reducing the number of airborne particles in your home.

The [bigger|higher} the MERV rating, the better the filter will be. Ratings can be on a scale of 1-20, but this doesn’t mean you should try to find a furnace filter with a 20 MERV rating. In fact, most filters with ratings above 13 are often designed for hospitals or other buildings that need the safest, most hygienic conditions possible.

What Happens if I Forget to Change My Furnace Filter?

Forgetting to replace your furnace filter isn’t the end of the world, but it can negatively affect how effective your HVAC system is. Furnaces need unobstructed airflow for efficient heating, and a dirty filter can slow that down. The longer you go without replacing it, however, the more likely problems can develop that will require furnace repair. Here are a few of the most common:

    • The furnace overheats: Without steady airflow, the temperature in your furnace can steadily increase. Safety components should shut off the furnace when it recognizes overheating, but this may keep happening until the filter is replaced.
    • Your HVAC system starts short cycling: Short cycling is when your equipment starts and stops over and over. This creates more wear and tear, which shortens your system’s life span.
    • The air conditioner’s cooling coil freezes: The air conditioner also needs steady airflow. Without it, the refrigerant coils could get too cold and freeze over.
    • Your HVAC system stops working: When your HVAC system runs too long without adequate airflow, it could lead to a piece of equipment failing entirely.

Is No Air Filter Better Than a Dirty One?

Definitely not! Your furnace filter is still a key component for getting the most out of your HVAC system. You should always have a filter in place, even if you forget to replace it from time to time. A professional service company like Service Experts Heating, Air Conditioning & Plumbing can help you keep up with routine furnace maintenance in the U.S. including replacing the air filter.

Savings For You

See All Offers Here >
parts and labor icon

$50 OFF Any Repair

  • Save $50 on a Paid Service
  • Written 100% Satisfaction Guarantee
  • Plus, ask how to save an additional 15% and waive your trip charge!
print

Make No Payments for 30 Days!

  • Upgrade to Worry-Free Comfort with the Advantage Program and make NO payments for 30 days!
print

© 2024 Service Experts, Service Experts Heating & Air Conditioning, and the Service Experts logo and design are registered trademarks of Service Experts LLC and used under license by SE Canada Inc. All Rights Reserved. *Not applicable to the Advantage Program. See your signed Advantage Program Agreement for full details and exclusions. 100% Satisfaction Guarantee is subject to certain restrictions and limitations as set forth in the applicable Terms and Conditions.